Using The Handle Zoom Rocker; Using The Supplied Wireless Controller Or An Optional Remote Controller - Canon XF705 Instruction Manual

4k
Hide thumbs Also See for XF705:
Table of Contents

Advertisement

Using the Handle Zoom Rocker

You can set the zoom speed of the handle zoom rocker using
the ZOOM SPEED switch and the menu.
1 Set the ZOOM switch to ROCKER.
2 Move the zoom rocker toward
S
angle) and toward
Handle zoom rocker: Approximate zoom speeds
[v % Camera Setup] >
[Handle Zoom Speed H] / [Handle Zoom Speed L]
[1] (slowest)
[16] (fastest)
* When the zoom speed is too fast, it will be more difficult to focus while zooming.
Setting the Zoom Speed
1 Select the overall speed level (steps 1-2, A 70).
2 Select [Handle Zoom Speed H] or [Handle Zoom Speed L].
> [v % Camera Setup] > [Handle Zoom Speed H] or [Handle Zoom Speed L]
• You can set the zoom speed independently for each of the positions of the ZOOM SPEED switch.
3 Select the desired speed and then press SET.
4 Set the ZOOM SPEED switch to H or L.
• You can set the ZOOM SPEED switch to OFF to disable the zoom rocker on the handle.
Using the Supplied Wireless Controller or an
Optional Remote Controller
Set the ZOOM switch to ROCKER to operate the zoom
remotely. The zoom speeds when using the supplied wireless
controller, the optional RC-V100 Remote Controller or a
commercially available remote control connected to the
REMOTE terminal are different. When using the supplied
wireless controller, you must press the record enable button
and T or W button simultaneously to zoom.
T
to zoom out (wide-
to zoom in (telephoto).
(time required to zoom end-to-end)
[Low]
4 min 38 sec
4.2 sec
[v % Camera Setup] > [Zoom Speed Level]
[Normal]
2 min
2.6 sec
Zooming
71
[High]
1 min
0.9 sec*

Advertisement

Table of Contents
loading

Table of Contents