Audio Output - Canon XF705 Instruction Manual

Audio Output

Audio Output
The camcorder can output audio from the SDI terminal, HDMI OUT terminal, × (headphone) terminal or
speaker*. You can select which two channels of the 4 audio channels recorded with the clip will be output from
150
the HDMI OUT terminal, headphones and speaker.
* Only monaural output is available for the speaker.
Audio output configuration
Recorded audio configuration
Audio format
4-channel
linear PCM
1
You can select the two channels to be output with the procedure below.
Operating modes:
1 Select the menu setting corresponding to the desired terminal.
> [¡ %* Audio Setup] > [Monitor Channels] (headphones or speaker) or [HDMI OUT Channels]
(HDMI OUT terminal)
* Appears on page ! in
2 Select the desired option and then press SET.
• The audio channels selected for output will appear on the right of the screen (In
> [¢ % Monitoring Setup] > [Custom Display 2] > [Monitor Channels] is set to [On]).
Options
All of the following settings are available for [Monitor Channels]; only [CH1/CH2] and [CH3/CH4] are available for
[HDMI OUT Channels].
Setting
[CH1/CH2]
[CH1/CH1]
[CH2/CH2]
[CH1+2/CH1+2]
[CH3/CH4]
[CH3/CH3]
[CH4/CH4]
[CH3+4/CH3+4]
[CH1+3/CH2+4]
NOTES
• If you set an assignable button to [Monitor Channels] (A 117), you can press the button to toggle between
the audio channel output options.
Audio output during recording/playback
Audio bit depth SDI terminal
4-channel
16 bit linear PCM
24 bit
mode.
Audio output
L
CH1
CH1
CH2
CH1+CH2 mixed
CH3
CH3
CH4
CH3+CH4 mixed
CH1+CH3 mixed
1
HDMI OUT terminal
2-channel
linear PCM
16 bit
R
CH2
CH1
CH2
CH1+CH2 mixed
CH4
CH3
CH4
CH3+CH4 mixed
CH2+CH4 mixed
mode, only if