Clip Operations; Using The Clip Menu - Canon XF705 Instruction Manual

Clip Operations

Besides playing back a clip, you can perform other operations from the clip menu, such as deleting a clip or
displaying clip information. Refer to the following table for available functions and refer to the following pages for
more details of the functions.
Operating modes:
Clip menu functions
Menu item
[Cancel]
[Display Clip Info]
[Add $ Mark]/[Delete $ Mark]*
[Add % Mark]/[Delete % Mark]*
[Del. All Shot Marks]
[Copy Clip]
[Recover Clip]**
[Delete Clip]
[Delete User Memo]
[FTP Transfer]
* If the clip already contains an $ or % mark, the [Delete] option will appear in the clip menu.
** Appears only when a clip requires recovery. In such case, only [Cancel], [Recover Clip] and [Delete Clip] will appear in the clip
menu.

Using the Clip Menu

1 Select a clip and then press SET.
• The clip menu appears. Available functions depend on the index screen and which functions are enabled.
2 Select the desired function and then press SET.
• The function is enabled. For some functions, further action may be required. Follow the onscreen directions.
• Press the CANCEL button instead to return to the clip index screen.
IMPORTANT
• Observe the following precautions while an access indicator is illuminated in red. Failure to do so may result in
permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the card slot cover of the card being accessed and do not remove the card.
NOTES
• Make sure the LOCK switch on the SD card is not set to prevent writing.
Closes the clip menu.
Displays the clip information screen.
Adds or deletes an $ mark.
Adds or deletes a % mark.
Deletes all the shot marks from a clip.
Copies a clip from the selected SD card to the other.
Recovers a clip.
Deletes a clip.
Deletes the user memo and GPS information of a clip.
Transfers a clip using the FTP protocol.
Description
Clip Operations
137
A
–
138
139
139
141
139
37
140
140
177