Recovering Clips - Canon XF705 Instruction Manual

Recovering Clips

Some actions, such as suddenly turning off the camcorder or removing the SD card while data is being
recorded, can cause data errors in the recorded clip.
Operating modes:
1 Open the index screen with the clip you wish to recover (A 131).
2 Select the desired clip (a clip with a yellow
to open the clip menu.
3 Select [Recover Clip] and then press SET.
4 Select [OK] and then press SET.
• The camcorder will attempt to recover the corrupted data.
5 When the confirmation message appears, press SET.
NOTES
• This procedure may delete clips shorter than 1 second in length.
• In some cases, it may not be possible to recover the data. This is more likely when the file system is corrupted
or the card is physically damaged.
• Only clips recorded with this camcorder can be recovered. Photos cannot be recovered.
icon instead of a thumbnail image) and then press SET
Using SD Cards
37