Using The Fan - Canon XF705 Instruction Manual

To set the reel number or initial clip number
The initial clip number can only be set when [Clip Numbering] is set to [Continuous].
1 Select [Reel Number] or [Clip Number].
> [Æ " Recording/Media Setup] > [Metadata] > [Reel Number] or [Clip Number]
2 Select [Change] and then press SET.
• To reset the reel/clip number to [001], select [Reset] instead.
3 Push the joystick up/down to select the first digit of the reel/clip number and then press SET to move to the
next.
• Change the rest of the digits in the same way.
4 Select [Set] and then press SET.
To set the user-defined field
1 Select [User Defined].
> [Æ " Recording/Media Setup] > [Metadata] > [User Defined]
2 Select [Change] and then press SET.
• To reset the user-defined field to [CANON], select [Reset] instead.
3 Push the joystick up/down to select the first character and then press SET to move to the next.
• Change the rest of the characters in the same way.
4 Select [Set] and then press SET.

Using the Fan

The camcorder uses an internal cooling fan to reduce the camcorder's internal heat. You can change the fan's
operation mode.
Operating modes:
1 Select [Fan].
> [B % System Setup] > [Fan]
2 Select the desired option and then press SET.
Options
[Automatic]: The fan runs while the camcorder is not recording and is automatically turned off while the
camcorder is recording. However, if the internal temperature of the camcorder is too high (b
appears in red), the fan will be activated automatically (in that case, ` will appear next to the
b icon). When the camcorder's temperature has decreased sufficiently, the fan will be turned
off. Use this setting when you do not want the camcorder to pick up the fan's operating sound.
[Always On]: The fan runs at all times.
IMPORTANT
• While the fan is running, the exhaust vent will emit warm air.
• Be careful not to obstruct in any way the fan's air vents (A 11, 13, 16).
NOTES NOTES
• Depending on the ambient temperature and other shooting conditions, the fan may not turn off even if you set
its operating mode to [Automatic].
• In mode the fan runs at all times.
Recording Video
49