Connecting an External Microphone or External Audio Input Source to the Camcorder
To each of the INPUT terminals you can attach commercially available microphones, digital audio sources (AES/
EBU), or analog line in sources with an XLR connector. To the MIC terminal you can attach commercially
available condenser microphones with their own power supply, and a 3.5 mm stereo mini plug.
Using the supplied microphone holder, you can fix external microphones with a diameter of 19 mm to 20 mm.
Follow the procedure below to attach a microphone (refer also to the following illustration). To connect an
external device to the camcorder, plug the device's cable into the desired INPUT terminal ( ).
1 Loosen the microphone lock screw ( ), open the
microphone holder and insert the microphone ( ).
2 Tighten the lock screw and put the microphone cable through the cable
clamp under the microphone holder ( ).
3 Plug the microphone cable into the desired INPUT terminal ( ) or the MIC terminal ( ).
INPUT 2 terminal
Cable clamp
INPUT 1 terminal
Recording Audio
97
Microphone lock screw
MIC terminal