Advanced Audio Input Settings - Canon XF705 Instruction Manual

NOTES NOTES
• We recommend using headphones when adjusting the audio level. If the input level is too high, audio may
become distorted even if the audio level indicator shows an appropriate level.
• If you set an assignable button to [Audio Level Indicator] (A 117), you can press the button to turn the
onscreen audio level indicator on and off.

Advanced Audio Input Settings

Operating modes:
Low-Cut Filter (Built-in Microphone)
If you selected [Built-in Mic] as the audio input for an audio channel (A 95), you can activate the built-in
microphone's low-cut filter.
1 Select [Built-in Mic Low Cut].
> [¡ # Audio Setup] > [Built-in Mic Low Cut]
2 Select the desired option and then press SET.
Options
[Off]: For recording audio under usual conditions.
[LC1]: For recording mainly people's voices.
[LC2]: For reducing the background sound of wind when recording outdoors in windy surroundings (for
example, on a beach or close to buildings). Note that when you use this setting some low-
frequency sounds may be suppressed along with the sound of wind.
Microphone Sensitivity (Built-in Microphone)
If you selected [Built-in Mic] as the audio input for an audio channel (A 95), you can adjust select the built-in
microphone's sensitivity.
1 Select [Built-in Mic Sensitivity].
> [¡ # Audio Setup] > [Built-in Mic Sensitivity]
2 Select the desired option and then press SET.
Options
[Normal]: For recording audio under usual conditions.
[High]: For recording audio at a higher volume (+6 dB).
Microphone Attenuator (Built-in Microphone)
If you selected [Built-in Mic] as the audio input for an audio channel (A 95), you can activate the built-in
microphone's attenuator (12 dB).
1 Select [Built-in Mic Att.].
> [¡ # Audio Setup] > [Built-in Mic Att.]
2 Select [On] and then press SET.
Recording Audio
101