Playback Controls During Clip Playback - Canon XC15 Instruction Manual

Playback
Icons on the right side of the screen
Icon/Display
8 00/00
000-0000
112
Icons on the bottom of the screen
Icon/Display
,
Ð, Ý, f, h
9:00 AM
25 Oct.,2016

Playback Controls during Clip Playback

When you play back a clip, touch the screen to display the playback controls to operate the various types of
playback. Refer to the following table.
Operating modes:
Available playback types
You can perform the following during playback, unless stated otherwise.
Playback type
Fast playback
Frame advance/reverse
Skip to the beginning of
the next clip
Skip to the beginning of
the current clip
Skip to the previous clip
Return to playback mode Touch [Ð].
Normal/reverse slow
playback
NOTES
• There is no audio during any of the playback types listed in the previous table. Also, there is no audio when
playing back clips recorded in slow & fast recording.
• During fast/slow playback, you may notice some anomalies (blocky video artifacts, banding, etc.) in the
playback picture.
• The speed indicated on the screen is approximate.
• During frame reverse, the interval between frames depends on the video configuration used:
1 frame (for 4K clips), approx. 0.25 seconds (for HD clips with a frame rate of 50.00P) or approx. 0.5 seconds
(for other video configurations).
• During reverse slow playback, the interval between frames will be an interval of approx. 0.25 seconds (for clips
with a frame rate of 50.00P) or approx. 0.5 seconds (for other video configurations).
Table of Contents
Current photo / Total number of photos
File number
Button to magnify the photo.
Playback controls during photo playback.
Data code
Operation
Touch [Ø] or [×].
Repeat to increase the playback speed to
approximately 5x  15x  60x the normal speed.
During playback pause, touch [Ô] or [Ó].
Touch [Ù].
Touch [Ú].
Touch [Ú] twice.
Touch [Ö] or [Õ].
Repeat to decrease the speed to approximately 1/4x  1/8x.
Description
Description
Menus
A
–
142
A
115
113
141
Index