Inserting And Removing An Sd Card - Canon XF705 Instruction Manual

Using SD Cards

Inserting and Removing an SD Card

1 Open the card slot cover.
34
2 Insert the SD card, with the label facing the
viewfinder, all the way into the card slot until it
clicks.
• To remove the SD card, make sure the access indicator
is off and then push the card once to release it. When
the card springs out, pull it all the way out.
3 Close the card slot cover.
• Do not force the cover closed if the card is not correctly
inserted.
Card access indicators
SD CARD 2/ SD CARD 3
indicator
Red
Green
Off
> [B $ System Setup] > [LED] > [SD Card Access LED] to [Off], the card access
If you set
indicators will not illuminate.
IMPORTANT
• Observe the following precautions while a card access indicator is illuminated in red. Failure to do so may
result in permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not remove the card.
• SD cards have front and back sides that are not interchangeable. Inserting a card facing the wrong direction
can cause a malfunction of the camcorder. Be sure to insert the card as described in step 2.
NOTES
• SD cards have a physical switch to prevent writing on the card so as to avoid the accidental erasure of the
card's content. To write-protect the SD card, set the switch to the LOCK position.
Accessing the SD card.
The card slot is currently selected and the camcorder is ready to record/play back (clips on either card, photos on
SD card B only).
An SD card is not inserted, the card is not being accessed, the card is write-protected with the LOCK switch, or
the card slot is not currently selected.
SD card status
Card access
indicators