Status:csum; Status:csummary:enable; Bit Configuration Of Operation Status Registers; Status:operation - Keysight Technologies N3301A Programming Manual

4 - Language Dictionary

STATus:CSUM?

This query returns the value of the Channel Event summary register. The bits in this register correspond
to a summary of the channel register for each input channel. Reading the Channel Event summary
register clears it. This command is not channel specific, it applies to the entire mainframe.
Query Syntax
Parameters
Examples
Returned Parameters
Related Commands

STATus:CSUMmary:ENABle

This command sets or reads the value of the Channel Enable summary register. This command is not
channel specific, it applies to the entire mainframe.
Command Syntax
Parameters
Examples
Query Syntax
Returned Parameters
Related Commands

Bit Configuration of Operation Status Registers

Bit Position
Bit Name
Bit Weight
CAL = Interface is computing new calibration constants

STATus:OPERation?

This query returns the value of the Operation Event register. The Event register is a read-only register
that holds (latches) all events that are passed by the Operation NTR and/or PTR filter. Reading the
Operation Event register clears it. This command is not channel specific, it applies to the entire
mainframe.
Query Syntax
Parameters
Examples
Returned Parameters
Related Commands

STATus:OPERation:CONDition?

This query returns the value of the Operation Condition register. That is a read-only register that holds the
real-time (unlatched) operational status of the electronic load. This command is not channel specific, it
applies to the entire mainframe.
Query Syntax
Parameters
Examples
Returned Parameters
Related Commands
92
STATus:CSUMmary[:EVENt]?
None
STAT:CSUM:EVEN?
<NR1> (register value)
*CLS
STATus:CSUMmary:ENABle <NRf+>
channel number
STAT:CSUM:ENAB 3
STATus:CSUMmary:ENABle?
<NR1> (register value)
*CLS
15–5
not used WTG
STATus:OPERation[:EVENt]?
None
STAT:OPER:EVEN?
<NR1> (register value)
*CLS STAT:OPER:NTR
STATus:OPERation:CONDition?
None
STAT:OPER:COND?
<NR1> (register value)
STAT:QUES:COND?
5 4–1
not used
32
WTG = Interface is waiting for a trigger.
STAT:OPER:PTR
0
CAL
1