[Source:]Transient:mode; [Source:]Transient:lmode; [Source:]Transient:twidth - Keysight Technologies N3301A Programming Manual

4 - Language Dictionary

[SOURce:]TRANsient:MODE

Channel Specific
This command selects the operating mode of the transient generator as follows.
The transient generator puts out a continuous pulse stream.
CONTinuous
The transient generator puts out a single pulse upon receipt of a trigger.
PULSe
The transient generator toggles between two levels upon receipt of a trigger.
TOGGle
Command Syntax
Parameters
*RST Value
Examples
Query Syntax
Returned Parameters
Related Commands

[SOURce:]TRANsient:LMODE

Channel Specific
This command selects whether the transient generator uses immediate or list values for the transient
settings.
The transient generator uses the fixed or immediate values (set by the
FIXed
TRANsient function commands)
The transient generator uses the transient values programmed by the list.
LIST
Command Syntax
Parameters
*RST Value
Examples
Query Syntax
Returned Parameters
Related Commands

[SOURce:]TRANsient:TWIDth

Channel Specific
This command sets the pulse width of the transients when the generator is in PULSe mode.
Command Syntax
Parameters
*RST Value
Examples
Query Syntax
Returned Parameters
Related Commands
90
[SOURce:]TRANsient:MODE <mode>
CONTinuous | PULSe | TOGGle
CONTinuous
TRAN:MODE FIX
[SOURce:]TRANsient:MODE?
<CRD>
TRAN:DCYC
[SOURce:]TRANsient:LMODE <mode>
FIXed | LIST
FIXed
TRAN:LMODE FIX
[SOURce:]TRANsient:LMODE?
<CRD>
TRAN:MODE
[SOURce:]TRANsient:TWIDth <NRf+>
0.00005s - 4s | MAXimum | MINimum
seconds
Unit
0.0005s
TRAN:TWID .005
[SOURce:]TRANsient:TWIDth?
<NR3>
TRAN:DCYC
TRAN
TRAN
TRAN:TWID 5E-4
TRAN