Page 3
Where to Find the Latest Information Documentation is updated periodically. For the latest information about this instrument, including firmware upgrades, application information, and product information, click the website link below. http://www.keysight.com/find/n5531x To receive the latest updates by email, subscribe to Keysight Email Updates at the following URL: http://www.keysight.com/find/MyKeysight Is your product software up-to-date? Periodically, Keysight releases software updates to fix known defects and incorporate product enhancements.
Keysight Technologies U5532C Sensor Module User’s Guide General Information This user’s guide contains information about installation, operation, and product specifications for the U5532C sensor module.
General Information Description Description The U5532C is intended to be used with the N5531X Measuring Receiver. The N5531X system contains an N9030B PXA Signal Analyzer with the N9091EM0E Measuring Receiver application. The U5532C is essentially a USB power sensor with a power splitter at the input. See Figure 1-1 on page 9.
The four numbers of the prefix are a code identifying the date of the last major design change incorporated in your Keysight Technologies product. The four-digit suffix is a sequential number and coupled with the prefix, provides a unique identification for each unit produced.
If there is mechanical damage notify the nearest Keysight Technologies office as shown in below. Keep the damaged shipping materials (if any) for inspection by the carrier and an Keysight Technologies representative.
(earth) ground. Any interruption of the protective earth grounding will cause a potential shock hazard that could result in personal injury and cause damage to the sensor module. Keysight U5532C Sensor Module User’s Guide...
Page 14
Repeated flexing of coiled, interconnect cables can degrade SWR and increase RFI of the RF output cable. 4. Do not attempt to tighten the sensor module input connector by twisting the body of the sensor module. Keysight U5532C Sensor Module User’s Guide...
Installing the Cal Factors in the N5531X (N9091EM0E) 1. Connect the external storage device via USB that contains the U5532C calibration files to the PXA. The U5532C calibration files come on a CD-ROM allowing you to use an external USB CD-ROM drive to load the files onto the instrument.
Page 16
Installation Installing the Calibration Factors 3. Select Cal Factor > Recall From. Use the Browser to navigate to the file and select Recall. Keysight U5532C Sensor Module User’s Guide...
Keysight Technologies U5532C Sensor Module User’s Guide Specifications The specifications listed in Table 3-1, “Specifications,” are the performance standards or limits against which the sensor module may be tested. These specifications are valid ONLY after proper calibration of the power meter.
Page 19
33 GHz to 40 GHz < 1.75:1 40 GHz to 50 GHz 500nW Zero Set Measurement Noise < 1.1 µW Zero Drift < 70 nW a. When connected to PXA with at least 30 dB attenuation Keysight U5532C Sensor Module User’s Guide...
Page 21
52 mm 52 mm Width 60 mm 60 mm 60 mm 60 mm Length Without Cable 215 mm 215 mm 206 mm 215 mm Length With Cable 1885 mm 1885 mm 1876 mm 1885 mm Keysight U5532C Sensor Module User’s Guide...
Page 22
Specifications U5532C Sensor Module Supplemental Information Figure 3-1 Nominal Cal Factor Uncertainty Option 504 and 518 Figure 3-2 Nominal Cal Factor Uncertainty Option 526 and 550 Keysight U5532C Sensor Module User’s Guide...
Specifications Regulatory Information Regulatory Information The U5532C complies with the following Electromagnetic Compatibility (EMC) compliances: — IEC 61326-1 / EN 61326-1 — Canada: ICES/NMB-001 — Australia/New Zealand: AS/NZS CISPR11 Regulatory Markings The RCM mark is a registered trademark of the Australian Communications and Media Authority.
Page 24
Medical Group 1 Class A product. This instrument complies with the WEEE Directive (2002/96/EC) marking requirement. This affixed product label indicates that you must not discard this electrical or electronic product in domestic household waste. Keysight U5532C Sensor Module User’s Guide...
To contact Keysight for sales and technical support, refer to the support links on the following Keysight websites: — www.keysight.com/find/u5532c (product-specific information and support, software and documentation updates) — www.keysight.com/find/assist (worldwide contact information for repair and service) Keysight U5532C Sensor Module User’s Guide...
Need help?
Do you have a question about the U5532C and is the answer not in the manual?
Questions and answers