Compatibility Imatch Interface - Kalfire G Series User Instructions

sembly.
8. Renewing or replacing components
that fall under the scope of the gua-
rantee do not extend the duration of
the warranty.
9. Should the technical fitter approved
by Kalfire be unable to rectify the
problem covered by the warranty,
then he is entitled upon his own
express desire to request Kalfire to
assume responsibility for doing so
(only valid in the Benelux, Germany
and France).
10. Verification or repair of an entire gas
fire or parts thereof can only take
place by appointment, after prior
consultation between Kalfire and the
technical fitter approved by Kalfire.
11. A dated proof of purchase must
be presented to Kalfire should a
possible home repair service (only
available in the Benelux, Germany
and France) be carried out within
the warranty period.
12. In the event of home repair service
outside the warranty period, materi-
al costs, working hours and call-out
charges will apply.
The warranty is not applicable in the
following circumstances:
1. If the warranty provisions have not
been complied with, in part or in full.
2. If alterations to the appliance have
been brought about without Kalfire's
written permission to do so.
3. If the appliance passes into new
ownership.
4. If the appliance has not been fitted
according to the Installation Manual
and/or has not been used according
9
to the user instructions.
5. Should deviation from the Kalfire
specifications have occurred in any
way or form during installation of the
concentric flue duct system.
6. Should deviation from the Kalfire
specifications have occurred in any
way or form during configuration of
the decorative elements, including
possible ceramic wood logs on the
burner bed.
7. Damage attributable to external
causes (shocks, lightning, falling,
flooding or overheating of the appli-
ance) during transport, storage or
installation.
8. Should the appliance be impacted
by neglect, improper use and/or
gross negligence.
9. If the repair or delivery of individual
parts be carried out by another
manufacturer or by a professional
technical fitter who has not been ap-
proved by Kalfire.

1.4 Compatibility iMatch interface

The iMatch interface enables the ap-
pliance to be operated by an external
application such as a tablet or smart-
phone. The iMatch interface ensures
that connection is made between the
local Wi-Fi network and the appliance.
In some cases it can happen that the
interface does not function adequate-
ly. This can be caused by insufficient
coverage (signal) by the Wi-Fi network
or because the appliances connected
to one another (including telephone,
tablet or router) are incompatible.
The iMatch interface and your external