Compatibility Imatch Interface; Receipt And Verification - Kalfire G Series Installation Instructions Manual

6. Glass, tubing and rubbers as well as physical and chemical
external influences during transport, storage or installation
fall outside the scope of the warranty.
7. Should disruption occur within the warranty period caused
by a manufacturing error or material defect, Kalfire will
deliver the components needed for repair to the technical
fitter of the gas fire, without paying compensation for
dismantling or assembly.
8. Renewing or replacing components that fall under the
scope of the guarantee do not extend the duration of the
warranty.
9. Should the technical fitter approved by Kalfire be unable
to rectify the problem covered by the warranty, then he is
entitled upon his own express desire to request Kalfire to
assume responsibility for doing so (only valid in the Benelux,
Germany and France).
10. Verification or repair of an entire gas fire or parts thereof
can only take place by appointment, after prior consultation
between Kalfire and the technical fitter approved by Kalfire.
11. A dated proof of purchase must be presented to Kalfire
should a possible home repair service (only available in the
Benelux, Germany and France) be carried out within the
warranty period.
12. In the event of home repair service outside the warranty
period, material costs, working hours and call-out charges
will apply.
The warranty is not applicable in the following circumstances:
1. If the warranty provisions have not been complied with,
in part or in full.
2. If alterations to the appliance have been brought about
without Kalfire's written permission to do so.
3. If the appliance passes into new ownership.
4. If the appliance has not been fitted according to the
Installation Manual and/or has not been used according
to the user instructions.
5. Should deviation from the Kalfire specifications have
occurred in any way or form during installation of the
concentric flue duct system.
6. Should deviation from the Kalfire specifications have
occurred in any way or form during configuration of the
decorative elements, including possible ceramic wood logs
on the burner bed.
7. Damage attributable to external causes (shocks, lightning,
falling, flooding or overheating of the appliance) during
transport, storage or installation.
8. Should the appliance be impacted by neglect, improper use
and/or gross negligence.
9. If the repair or delivery of individual parts be carried out by
another manufacturer or by a professional technical fitter
who has not been approved by Kalfire.

1.4 Compatibility iMatch interface

The iMatch interface enables the appliance to be operated by an
external application such as a tablet or smartphone. The iMatch
interface ensures that connection is made between the local Wi-
Fi network and the appliance. In some cases it can happen that
the interface does not function adequately. This can be caused
7
by insufficient coverage (signal) by the Wi-Fi network or because
the appliances connected to one another (including telephone,
tablet or router) are incompatible. The iMatch interface and
your external appliance must be connected to the same router
(through the same network).
The Wi-Fi signal can be checked in advance and can be improved
if required. With regard to the huge diversity of appliances, their
compatibility can regrettably not be confirmed beforehand.
Only after installation of the interface can compatibility be
confirmed. Kalfire accepts no liability for the non-functioning, or
insufficient functioning, of the iMatch interface as a consequence
of the cause described above.

1.5 Receipt and verification

Verification upon receipt
The gas fire is delivered as a fully-assembled appliance. The
appliance is ready for use immediately after installation. Report
any damage, missing parts or incorrect deliveries within five
working days to Kalfire (according to the supply terms and
conditions). Check the following upon receipt;
1. Check that the packaging has not been damaged.
2. Check the product's glass panels for cracks or breakages.
3. On delivery, report damage caused during transport to the
shipper on the packing slip.
4. Check that all parts/accessories have been delivered.
5. Check if the correct product has been delivered.
6. Check if the gas specifications comply with your order
form.
Scope of delivery
Supply scope of the gas fire:
•
Gas fire
•
Technical unit (including piping, wiring and silicone hose
for measuring sustainability indicators)
•
iMatch remote control
•
Installation Manual
•
User instructions
•
Ceramic logs and furnishings, ceramic log set and
decorative elements (Kalfire GP)
•
Ceramic log set and decorative material, white pebbles,
grey split or cryptonite (depending on the chosen
decorative elements for the Kalfire G).
•
Restrictor plates
•
Spray paint
•
Energy label