Setting The Natural Spark Generator; Fill The Natural Spark Generator; Configure The Imatch App - Kalfire G Series User Instructions

lighting or decrease its intensity.
4.12 Setting the Natural Spark
Generator
If the gas fire is equipped with a Natural
Spark Generator, lifelike sparks will be
produced when it is alight. The higher
the flames, the more sparks there are.
The gas fire must be alight for some
time before the Natural Spark Genera-
tor can produce sparks. This is why the
appliance only activates the Natural
Spark Generator after it has been ope-
rating for 10 minutes. The user can set
a time interval with the remote control.
The last Natural Spark Generator pro-
gramme selected is saved when the gas
fire is turned off. Carry out the following
steps to set the time interval:
1. Press the forward right button
access the Natural Spark Generator
programme.
2. At the top of the screen, the word
"SP0" (or another previously-set
value) will appear in the display.
3. Press the + or ­ buttons to chan-
ge the Natural Spark Generator
programme. (SP0 t/m SP8).
4. Briefly press
Settings:
SP0 = Natural Spark Generator is
switched off; no sparks
SP1 = 1 spray of sparks per hour.
SP2 = 2 sprays of sparks per hour.
SP3 = 3 sprays of sparks per hour.
SP4 = 4 sprays of sparks per hour.
SP5 = 5 sprays of sparks per hour.
SP6 = 6 sprays of sparks per hour.
SP7 = 10 sprays of sparks per hour.
SP8 = random sprays of sparks, one
per minute
21
to exit the menu.
4.13 Fill the Natural Spark
Generator
The Natural Spark Generator system
contains a cartridge of powder (Natural
Spark Powder) on delivery. Use the
instruction delivered with bthe new
powder for refilling the Natural Spark
Generator.

4.14 Configure the iMatch app

First connect your iMatch-interface to
the local network, before the iMatch is
configured.
1. Download de iMatch app uit de App
store (Apple) of Play store (Android).
2. Open the Wi-Fi settings on your
phone or tablet.
to 3. Select the Wi-Fi network named
"Kalfire".
4. Open the iMatch app.
5. Click on "Settings" in the top right
corner of the screen as depicted in
the figure.
Fig. 3: Configure the iMatch app