Imatch App Settings; Resetting The Imatch Interface - Kalfire G Series User Instructions

6. Click on "Wizzard" and follow the
instructions on the screen.
7. Click on the colour corresponding
with the LED on the searched
iMatch interface.
8. Click on the grey area to assign a
name ("living room" for example).
9. Provide your local Wi-Fi network's
name and password. Careful, name
and password are case sensitive.
10. The iMatch interface must be reset,
if the name or password do not cor-
respond. See: Resetting the iMatch
interface on page 22 .
11. Check the box in case the gas fire is
a hybrid (you can check this on the
model figure).
12. Wait 40 seconds while the wizzard is
shutting down and the Kalfire
logo becomes visible.
13. Reconnect with your Wi-Fi network
(in most cases happens automati-
cally).
14. Control the fireplace with the iMatch
app when the green LED lights up on
your iMatch interface.
15. Repeat step 5 to 14 for a maximum of
four fireplaces, if you want to control
multiple fireplaces with the iMatch
app.

4.15 iMatch app settings

In the iMatch app settings menu you
can select the following:
1. Language : Click on language and
select the desired language. U will
automatically return to the settings
screen
2. Appliances : Click on Appliances. You
22
will now see an overview of already
connected appliances and you
have the possibility to add another
fireplace. Change the name of the
room(s) present. Select the room
you want to change. In the screen
that appears next you are able to
change the name.
3. Wizard: click on Wizard and follow
the instruction to install an additional
fireplace.

4.16 Resetting the iMatch interface

1. Press the reset button of the iMatch
interface; this can be found on the
rear side of the iMatch interface.
2. Hold the button down until the red
LED start flashing rapidly (approxi-
mately 15 seconds).
3. Wait for the iMatch interface to
reboot.
4. Check whether the red LED is on.
Fig. 4: iMatch interface