Using The Imatch App Through The Imatch Interface - Kalfire G Series User Instructions

4.17 Using the iMatch app through
the iMatch interface
The gas fire can be controlled by using
the iMatch app, if the iMatch inter-
face is connected to your local Wi-Fi
network. First install the iMatch app
on your smartphone or tablet. See:
Configure the iMatch app on page 21.
Accessing home screen
1. Click on the iMatch app icon to open it.
2. Drag the standby icon to the right to
open the home screen.
Overview home screen
1. Initiating flame: Press the standby.
A semi-circle will appear and the
fireplace will start at 100% flame
intensity.
Fig. 5: Initiating flame
2. Setting the flame intensity: Press
and hold down the black dot. Move
your finger over the circle to set the
flame intensity. The percentage will
increase and decrease with the mo-
vement of your finger.
3. Hybrid LED lighting: Press "off" to
turn on the LED lighting. The LED
lighting turns on and a semi-circle
with the text Hybrid appears on the
screen. The LED lighting intensity is
23
not adjustable.
4. Heating mode: Press "hand control-
led" once in the middle of the circle.
Now select the heating mode Eco or
Manual.
Fig. 6: Heating mode
5. In case you choose Eco mode, the
fireplace is not controllable from the
App. The fireplace varies from mode
1 to 8 automatically.
6. Shutting down: The gas fire will
shut down, by pressing the stand-
by button again. The NSG is not
controllable by using iMatch.
7. CAREFUL! The NSG cannot be
operated by the iMatch.