Programme Choice For A; The Hybrid Led Lighting; Activating/Deactivating The; Hybrid Led Lighting And - Kalfire G Series User Instructions

at identical switch-on times.
17. Press P to exit the programme.
18. The and
control indicate that the time seg-
ments have been programmed.
4.10 Programme choice for the
hybrid LED lighting
If the gas fire is equipped with a hybrid
LED lighting function, it is possible to
vary the lighting effects. The different
parameters controlling the LED lighting
allow the oscillation, intensity and co-
lour to be set. In every programme, se-
lection of the word "AUTO" provides the
highest and clearest lighting intensity.
Carry out the following steps to adjust
the LED lighting programme:
1. Press the right button
P2 or P3" appears in the middle of
the display.
2. Press
a number of times until the
Table: LED programme
Programme Reacts to
Setting AUTO and Modulating
P1
between high and low
Setting AUTO and Modulating
between high and low
P2
Setting AUTO and Modulating
P3
between high and low
20
icons on the remote
until a "P1,
desired "P" programme is displayed.
3. Wait until the home screen appears.
4.11 Activating/deactivating
the hybrid LED lighting and

adjusting the lighting intensity

If the gas fire is equipped with hybrid
LED lighting, it will be automatically ac-
tivated as soon as the fire is turned on.
The number of horizontal bars at the
bottom of the screen indicate the level
of brightness of the LED lights. LED
lighting can also be activated when the
fire is not on. Carry out the following
steps to activate only the LED lighting:
1. Press to turn on the screen.
2. Press the right button until "P1, P2
or P3" appears in the centre of the
screen.
3. Press to activate the LED ighting
or increase its intensity.
4. Press to deactivate the LED
Light clear variation
10% to 90%, fading reddish LED
colour.
10% to 90%, yellowish and reddish
LED colour, alternately on the
left and right-hand sides of the
appliance.
Combination between Programme
P1 en P2