Table of Contents
Advertisement
1.4
Gi fireplace compatibility
You can control the fireplace with an external
device (e.g., tablet, phone). This connection can
be established by connecting the Gi fireplace
directly to the router with a UTP cable or
through a wireless WiFi connection. In case the
fireplace is connected wirelessly to the home
router, in some cases the WiFi connection may
not work properly. This may be caused by
insufficient coverage (signal) of the WiFi
network or because connected devices (w.o.
phone, tablet, router) are not compatible.
The Gi fireplace and your external device must
be connected to the same router (via the same
network). The Wi-Fi signal can be checked
beforehand and improved if necessary.
Unfortunately, due to the wide variety of
devices, compatibility cannot be checked in
advance. Compatibility will only become clear
after installation of the interface. Kalfire accepts
no liability for the failure of the Gi fireplace to
function properly or at all due to causes
described here.
1.5
Receipt and verification
Verification upon receipt
The gas fire is delivered as a fully-assembled
appliance. The appliance is ready for use
immediately after installation. Report any
damage, missing parts or incorrect deliveries
within five working days to Kalfire (according to
the supply terms and conditions).
Check the following upon receipt;
1.
Check that the packaging has not been
damaged.
2.
Check the product's glass panels for cracks
or breakages.
3.
On delivery, report damage caused during
transport to the shipper on the packing
slip.
4.
Check that all parts/accessories have been
delivered.
5.
Check if the correct product has been
delivered.
6.
Check if the gas specifications comply with
your order form.
Scope of delivery:
•
Gas fire
•
remote control
•
Installation Manual
•
User instructions
•
Ceramic burner logs
•
Ceramic log set and decorative material
•
Ember Glow
•
Restriction plates
•
Power cable (2m)
•
Spray paint
•
Energy label
7
Advertisement
Table of Contents
