Error Code Imatch Interface; Malfunctions Natural Spark Generator - Kalfire G Series User Instructions

5.2.3 Error code iMatch interface

Error code
Red light in
iMatch inter­
face is con­
stantly red
Red/green
LEDs are
flashing on the
iMatch
interface.
5.3 Malfunctions Natural Spark
Generator
No sparks, possible causes
If there is no spark visible (any more),
this can have the following causes:
•
Natural Spark Generator cartridge is
empty.
•
No power supply on the Natural
Spark Generator -> check whether
the Natural Spark Generator has
been connected correctly. See:
Wiring diagram on page 36 .
•
Natural Spark Generator pump / coil
is defect -> contact your dealer or
Kalfire.
33
Cause
The iMatch interface
has not yet been instal-
led or is not provided
with a sufficient Wi-Fi
network strength.
Distance between Wi-Fi
point and iMatch
interface is too great
You have not entered
the Wi-Fi settings
orrectly in the app
Solution
Install the iMatch interface.
Place your Wi-Fi point closed to the
iMatch interface (technical unit)
or place a Wi-Fi repeater.
Check the Wi-Fi settings. Erase the added
room from the app. Reset the
iMatch interface and try again.