Three Safety Measures For The Gas Fire - Kalfire G Series User Instructions

Balanced-flue gas fires
Hide thumbs Also See for G Series:
Table of Contents

Advertisement

20°
Fig. 1: Safe zone
WARNING Should the floor in front
of the fireplace consist of com-
bustible material and the distance
from the underside of the combus-
tion chamber to the floor be smaller
than 10 cm, a heat-resistant fire-
guard floor plate larger than 30 cm
or a stone should be placed.
Danger of combustion
FIRE HAZARD! Do not touch the
appliance! The gas fire is hot when
switched on or just switched off.
Ensure extra safety precauti-
ons and safety measures if less
able-bodied persons, elderly peo-
ple and/or children have access
to the fireplace. Only the remote
control and the technical unit can
be used without fear of danger due
to combustion.
Danger caused by fumes or gas leaks
DANGER OF EXPLOSION!
Fumes and/or gas leaks can cau-
se life-threatening situations.
Fumes can be the cause of carbon
monoxide poisoning and gas leaks
are an explosion risk.
12
20°
40 cm
30 cm
100 cm
If you notice fumes or gas, take the fol-
lowing precautions:
1. Switch off the gas fire.
2. Close the main gas valve.
3. Open windows and doors.
4. Advise an approved installer of the
issue.
DANGER OF EXPLOSION! Should
damage occur, close the gas valve.
Do not use the gas fire if a glass
panel is cracked, is not in place or
incorrectly mounted.
The gas fire needs a permanent power
supply. Interrupting the power supply
can impact safety precautions.
The risk of discolouration
CAREFUL! After the convection
system of the fireplace has been
heated, air particles, cigarette
smoke, candles and oil lamps can
cause discolouration of walls and
ceilings. Ensure sufficient ventilati-
on in the room in which the gas fire
is installed.
2.3 Three safety measures for the
gas fire
1. The flame is detected due to elec­
tronic ionisation measurement
Should the gas fire be unable to de-
tect a flame during ignition, the gas
supply will be interrupted for one
minute. A new ignition attempt will
follow automatically. To interrupt au-
tomatic ignition attempts: Press the
button to switch off the fireplace
directly and depress this button for
approximately 10 seconds.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents