Using The Imatch App Through The Imatch Interface - Kalfire G Series Installation Instructions Manual

3. Wait for the iMatch interface to reboot.
4. Check whether the red LED is on.
Fig. 30: iMatch interface
6.17 Using the iMatch app through the iMatch
interface
The gas fire can be controlled by using the iMatch app, if the
iMatch interface is connected to your local Wi-Fi network.
First install the iMatch app on your smartphone or tablet.
See: Configure the iMatch app on page 26.
Accessing home screen
1. Click on the iMatch app icon to open it.
2. Drag the standby icon to the right to open the home screen.
Overview home screen
1. Initiating flame: Press the standby. A semi-circle will
appear and the fireplace will start at 100% flame intensity.
2. Setting the flame intensity: Press and hold down the
black dot. Move your finger over the circle to set the flame
intensity. The percentage will increase and decrease with
the movement of your finger.
3. Hybrid LED lighting: Press "off" to turn on the LED lighting.
The LED lighting turns on and a semi-circle with the text
Hybrid appears on the screen.
27
The LED lighting intensity is not adjustable.
4. Heating mode: Press "hand controlled" once in the middle
of the circle. Now select the heating mode Eco or Manual.
5. In case you choose Eco mode, the fireplace is not
controllable from the App. The fireplace varies from mode 1
to 8 automatically.
6 Shutting down: The gas fire will shut down, by pressing the
standby button again.
Careful ! The NSG is not controllable by using iMatch.