Selecting Emc Filters - ABB ACL30 User Manual

340 EMC filters
WARNING! An EMC filter must not be installed if the drive is connected to
an IT power system (i.e. an ungrounded, or a high resistance grounded
[over 30 ohm] power system) or a corner-grounded TN system.

Selecting EMC filters

Drive type
ACL30-04...
-06A0
-09A0
-013A
-017A
-023A
-030A
-050A
-070A
*External filter; to be ordered separately

Degree of protection
IP20

Dimensions and weights
See dimension drawing of
For data of dimensions, wire sizes and tightening torques, see
dimensions on page 355.
Frame
B
B
C
D
EMC filters – JFI-0x
Filter type
EN 61800-3: 2004 Category C2
JFI-02*
JFI-03*
JFI-05*
JFI-07*
on page 354.
EMC filter – JFI-0x