Installation Checklist; Contents Of This Chapter; Check The Installation - ABB ACL30 User Manual

Installation checklist

Contents of this chapter

This chapter contains a list for checking the mechanical and electrical installation of
the drive module.

Check the installation

Check the mechanical and electrical installation of the drive module before start-up.
Go through the checklist below together with another person. Read the
instructions on the first pages of this manual before you work on the unit.
Check that...
MECHANICAL INSTALLATION
The ambient operating conditions are allowable. (See
specifications and Ambient
The unit is fastened properly to the cabinet. (See
Mechanical installation.)
The cooling air flows freely. (See
The motor and the driven equipment are ready for start. (See
installation, Technical
ELECTRICAL INSTALLATION
The VAR screw is removed if the drive is connected to an IT (ungrounded) supply
network. (See Connecting the power cables: Connection
The capacitors are reformed if stored over one year (contact local ABB representative
for more information). (See
The drive is grounded properly. (See
The supply (input power) voltage matches the drive nominal input voltage.
conditions.)
Cooling and degrees of
data: Motor connection.)
Maintenance: Reforming the
Safety instructions:
Installation checklist 75
Technical data: Drive
Planning the cabinet installation
protection.)
Planning the electrical
procedure.)
capacitors.)
Grounding.)
7
Safety

and