Fast User Set Change; Settings - ABB ACS355 Supplement Manual

14 Program features

Fast user set change

Totally 6 user sets and possibility change quickly between them. User can switch from
different ramp and controller values for different tools in case machine has several
tools.
Pararameter 0186 ACTIVE MACRO – shows which user set was last loaded,
updated after start inhibits are removed. Parameter 0186 changes to 0, when user
set load starts and drive is ready to start when parameter 0186 changes to loaded
user set value.
Related parameters are listed in the table below:


Settings

Parameter
0186 ACTIVE MACRO
1605 USER PAR SET CHG
1614 LOAD USER SET
1615 SAVE USER SET
9902 APPLIC MACRO
Additional information
Shows which user macro is actively loaded.
Enables the change of the User parameter set through
a digital input.
Selects which user set will be loaded.
Selects which user set will be saved.
Selects the application macro.