Speed Reference Mode Set To Multiple - ABB ACL30 User Manual

138 Program features
The function selects the speed reference based on the elevator operation mode as
follows.
• If neither the evacuation mode nor the inspection mode is active, the speed
reference is selected based on the combined status of parameters
REF MODE, 80.06
REF SEL3, and
• If either the evacuation mode or the inspection mode is active, the speed
reference is selected with parameter
INSPECTION SPEED, depending on which of the modes is active.
• If both the evacuation mode and the inspection mode are active, the evacuation
mode has higher priority.


Speed reference mode set to MULTIPLE

The table below further illustrates speed reference selection when
MODE is set to MULTIPLE.
10.81 10.84
EVACUATION INSPECTION
MODE MODE
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 1
1 x
SPEED REF SEL1,
80.09 SPEED REF SEL4.
80.06 SPEED
REF SEL1
0
1
0
1
0
1
0
1
x
x
80.07 SPEED REF SEL2,
80.16 EVACUATION SPEED or
80.07 SPEED 80.08 SPEED
REF SEL2 REF SEL3
0 0
0 0
1 0
1 0
0 1
0 1
1 1
1 1
x x
x x
80.05 SPEED
80.08 SPEED
80.15
80.05 SPEED REF
05.03 LIFT SPEED SEL
Speed1 (zero speed)
Nominal speed
Medium speed
Leveling speed
Releveling speed
Inspection speed
Speed2
Speed3
Inspection speed
Evacuation speed