Table of Contents
Advertisement
ADASH Ltd.
Selection of Measurement
A selection of measuring screen (method) can be performed by arrow buttons ▼ ▲. After press of a
button an "empty screen" is shown without measured data, and the measuring starts.
Measurement Methods Screens
Overall RMS values
Measurement of RMS vibration values in the ranges:
10 Hz - 1000 Hz in mm/s,
0.5 kHz - 16 kHz in g,
with estimated value of machine speed frequency.
Based on the speed and vibration values of the machine condition, colour of displayed value - green /
yellow / red - is determined.
The colour of bearing is determined regarding to the measured temperature.
Further technical and contact information can be found at www.adash.com
Fig. Measuring screen selection buttons
28
Adash 4900 – Vibrio M
Measuring screen
selection buttons
Advertisement
Table of Contents
