Table of Contents
Advertisement
ADASH Ltd.
Adash 4900 – Vibrio M
Fig. Placement of power batteries
Fig. Proper cell polarity
Plugging in Vibration Sensor
To measure a vibration signal we need to plug in the vibration sensor with ICP power. The plugged in
sensor must be a standard accelerometer with 100 mV/g sensitivity. The instrument is equipped by
its own source of ICP power for connected sensor. The sensor needs to be connected at the right
input plug by a supplied cable.
Fig. The instrument with a sensor connected
20
Further technical and contact information can be found at www.adash.com
Advertisement
Table of Contents
