Table of Contents
Advertisement
ADASH Ltd.
Instrument Operation
Switching on and off
The instrument is switched on by pressing of the middle button
Provided that batteries with sufficient voltage are placed in the instrument then a display will show an
instrument Logo.
Fig. Switching on
The instrument is switched off by pressing and holding the same button
POWER OFF label, version of firmware and serial number of instrument appear on the display. After
release the button the instrument switches off.
Description of numbers on power off screen:
1. Firmware version
2. Serial number
3. HP filter frequency for bearing (0,5 kHz), HP filter frequency for ISO (10 Hz)
4. The sensor sensitivity (100 mV/g)
Further technical and contact information can be found at www.adash.com
Fig. Buttons / Switching on the instrument
Fig. Switching off
26
Adash 4900 – Vibrio M
.
Instrument
on / off
button
for a longer time. The
Advertisement
Table of Contents
