Using Of Headphones - Adash 4900 Vibrio Ex User Manual

ADASH Ltd.

Using of headphones

The instrument is equipped by a 0.5 W amplifier for connecting of headphones and listening to a
measured signal. We can connect the headphones by a stereo 3.5 mm jack marked phones on the top
of the instrument (see figure in the Connectors chapter). After connecting we can hear a signal from
the vibration sensor in the headphones. Advisable volume can be set-up by the VOLUME item from
the instrument menu (see MENU chapter)
Decrease volume
button
Further technical and contact information can be found at www.adash.com
25
Adash 4900 – Vibrio M
Increase volume
button