Table of Contents
Advertisement
ADASH Ltd.
VOLUME
The volume bars appear. The volume is changed by buttons ▼ ▲. When the maximum volume is
reached, the symbol will become orange otherwise the amount of yellow filling shows the actual
volume. If the headphones are off, the symbol is grey. Next press of the button
instrument back to the measurement mode.
Fig.: Volume adjustment
During the instrument is switched on or off, the range is changed, the sensor is connected or
disconnected, the short unpleasant crack can be heard. This is not a defect of the instrument.
Be careful not to overload the headphone amplifier by excessive volume. This will distort a
signal in the headphones!
You can use any stereo or mono headphones with nominal impedance higher than 8 Ω. Both output
stereo channels are connected to the signal.
Decrease volume
button
Further technical and contact information can be found at www.adash.com
Fig.: Displayed volume
36
Adash 4900 – Vibrio M
returns the
Switched.off
cca 50%
Maximum
Increase volume
button
Advertisement
Table of Contents
