Route Measurements - Adash 4900 Vibrio Ex User Manual

ADASH Ltd. Adash 4900 – Vibrio M

Route measurements

The A4900 - Vibrio M instrument enables to perform route measurements. Before you start route
measurement you have to load route (list of machines) from computer (DDS2014) to the instrument.
Use the USB cable and connect A4900 - Vibrio M to your PC. Then use DDS 2014 software to load
route from PC into instrument. The A4900 - Vibrio M enables to save only one route. See the
DDS2014 manual for more details.
The instrument enables route readings. Use the DDS software for loading of route to the instrument.
Use the USB cable for connection. The connection will be opened only when the instrument is in the
overall values screen.
Select the MENU/ MEMORY/ ROUTE item. The route screen appears.
The first machine appears. The machines are the first level of route. By using the < - , + > you can find
required machine. When you open one machine (SEL) then first point appears (the point level). After
you select one point (SEL) then all required measurements will be taken.
On the machine level you can move between particular machines in the route. On the point level you
can move between particular points in selected machine.
46
Further technical and contact information can be found at www.adash.com