Selection Of Measurement; Measurement Methods Screens - Adash 4900 Vibrio III Manual

ADASH Ltd.

Selection of Measurement

A selection of measuring screen (method) can be performed by the buttons ▼ ▲. After press of a
button an "empty screen" is shown without measured data, and the measuring starts.

Measurement Methods Screens

Fig. Measuring screen selection buttons
Overall RMS values
Measurement of RMS vibration values in the ranges:
10 Hz - 1000 Hz in mm/s,
5 kHz - 16 kHz in g,
with estimated value of machine speed frequency.
Based on the speed and vibration values the machine condition and
a colour of the displayed value - green / amber / red - is determined.
Overall PEAK values
Measurement of peak vibration values in the ranges:
10 Hz - 1000 Hz in mm/s,
5 kHz - 16 kHz in g,
23
Adash 4900 – Vibrio III
Measuring screen
selection buttons