ADASH Ltd.
Adash 4900 – Vibrio M
The instrument memory
The model A4900 - Vibrio M has got 4MB data memory.
Two instrument versions
You can buy two versions of this device. The basic version (cheaper) has not available the memory.
The advanced version can use the memory. Both of them has the memory installed on the board and
only the firmware is different.
Upgrade to advanced version
If you want to upgrade the basic version to advanced version, ask your supplier for it. He can rewrite
the firmware in the device.
Off-Route measurement
The instrument offers many kinds of measurement. The results are displayed on specific screens.
Some screens contain more results ( e.g. RMS and Peak), some screens contain only one (e.g.
spectrum). You can save each screen to the memory. Such data are labelled as OFF-ROUTE.
Route measurements
The list of required measurements you can prepare in computer, actually in DDS2014 software. You
load the list to the A4900 - Vibrio M instrument. Then the standard route arrangement is available. You
see the name of sensor location on the screen, mount the sensor to that point and take the
measurement. Such data are labelled as ROUTE data. You download them back to the computer and
use the software for next data acquisition.
7
Further technical and contact information can be found at www.adash.com