Encoder Connection (X2) - Kollmorgen ServoStar 400 Assembly & Installation

Interfaces
4.6.2

Encoder connection (X2)

As an option, the motors can be fitted with a single-turn or multiturn sine-cosine encoder.
Preferred types are the ECN1313 and EQN1325 encoders. The encoder is used by the
SERVOSTAR 400 as a feedback device for drive tasks that require highly precise positio-
ning or extremely smooth running. If lead lengths of more than 25m are planned, please
consult our customer support.
The thermostat contact in the motor is connected via the encoder cable to the
SERVOSTAR 400 and evaluated there.
—
—
SERVOSTAR 400
40
Output voltage Up 5 V / max. 250 mA
Output voltage Us 11V / max. 250 mA
SubD15
07/05
17-pin round
SERVOSTAR
Kollmorgen
®
400 Installation Manual