European Directives And Standards; Ce Conformity - Kollmorgen ServoStar 400 Assembly & Installation

Kollmorgen
2.3

European Directives and Standards

Servo amplifiers are components that are intended to be incorporated into electrical plant
and machines for industrial use. When the servoamplifiers are built into machines or
plant, the intended operation of the amplifier is forbidden until it has been established that
the machine or plant fulfills the requirements of the EC Machinery Directive 98/37/EG and
the EC Directive on EMC (89/336/EEC) and the Low Voltage Directive 73/23/EEC.
To fulfill the EC Machinery directive 98/37/EG, the following standards have to be applied:
EN 60204-1
EN 292
The manufacturer of the machine must produce a hazard analysis for the machine
and take appropriate measures to ensure that unforeseen movements do not result
in personal injury or material damage.
To fulfill the Low Voltage Directive 73/23/EEC, the following standards have to be applied:
EN 60204-1
EN 50178
EN 60439-1
To fulfill the EC EMC regulations 89/336/EEC, the following standards have to be applied:
EN 61000-6-1 or EN 61000-6-2
EN 61000-6-3 or EN 61000-6-4
The manufacturer of the machine or plant is responsible for ensuring that they meet the
limits required by the EMC regulations. Advice on the correct installation for EMC – such
as shielding, grounding, arrangement of connectors and cable routing – can be found in
this documentation.
The machine / plant manufacturer must examine whether with its machine / plant
still further or other standards or EEC guidelines are to be used.
2.4

CE Conformity

Conformity with the EC Directive on EMC 89/336/EEC and the Low Voltage Directive
73/23/EEC is mandatory for servoamplifiers supplied within the European Union.
To fulfill the EMC directive, the standard EN 61800-3 is applied.
In the reference to noise immunity the servoamplifier fulfills the requirement to the cate-
gory second environment (industrial environment). For the range of the noise emission
the rvo amplifier fulfills the requirement to a product of the category reduced availability.
This is a product with reduced availability according to IEC 61800-3. This product
can cause interferences within domestic range; if required you must accomplish
appropriate measures.
The servo amplifiers have been tested by an authorized testing laboratory in a defined
configuration with the system components which are described in this documentation.
Any divergence from the configuration and installation described in this documentation
means that you will be responsible for carrying out new measurements to ensure that the
regulatory requirements are fulfilled.
To fulfill the Low Voltage Directive, the standard EN 50178 has to be applied.
®
SERVOSTAR 400 Installation Manual
07/05
(Safety and electrical equipment of machines)
(Safety of machines)
(Safety and electrical equipment of machines)
(Equipment of high voltage plant with electronic devices)
(Low-voltage switchgear and controlgear assemblies)
(noise immunity within the
(noise emission within the
Technical description
domestic range/industrial range)
domestic range/industrial range)
9