Reset To Factory Settings; Figure 7.50: Service Code For Resetting To Factory Settings - Leuze electronic LSIS 222 Technical Description

7.6.4

Reset to factory settings

By reading in the following service code, the LSIS 22x is reset to factory settings.
Attention!
When resetting to factory settings, the entire configuration of the LSIS 22x is lost and
all parameters are reset to their standard values.

Figure 7.50: Service code for resetting to factory settings

Listed in the following are the most important factory settings according to device model:
Factory settings LSIS 222 M5M-R1 - RS 232 interface
• Baud rate
• Data format
• Framing
• No read character
• Manual trigger mode
Factory settings LSIS 223 M5M-R1 - USB interface
• USB operating mode
• Keyboard layout
• Framing
• No read character
• Streaming presentation mode
Leuze electronic
Configuration using configuration codes
Reset to factory settings
9600bit/s
8 data bits, no parity, 1 stop bit
<STX>DATA<CR><LF>
'?'
start command: <SYN>T<CR>
stop command: <SYN>U<CR>
USB keyboard emulation
GERMAN
'ENTER'
none
Technical description LSIS 22x 75