Figure 7.20: Configuration Codes For Setting The Prefix - Leuze electronic LSIS 222 Technical Description

Configuration using configuration codes
Use the following configuration codes to set the suffix.

Figure 7.20: Configuration codes for setting the prefix

Notice!
With the LSIS 22x, an individual frame format can be defined for each code type. Further
information on this topic and on setting other prefix/suffix characters is available from Leuze
electronic.
46
Delete all suffix characters
Set <CR><LF> suffix
Set <HT> suffix
Technical description LSIS 22x
Set <CR> suffix
Set <ETX> suffix
Leuze electronic