7.4.2
NoRead output
You can set whether or not the 'NoRead' character '?' is output if a code could not be read.
Factory settings:
• LSIS 222 M5M-R1 (RS 232)
• LSIS 223 M5M-R1 (USB keyboard emulation)
• LSIS 223 M5M-R1 (USB COM port emulation)
By reading in one of the following configuration codes, the NoRead output option is
switched on or off.
Figure 7.21: Configuration code for switching the NoRead output option on/off
Leuze electronic
NoRead output ON
Technical description LSIS 22x
Configuration using configuration codes
NoRead output = '?'
no NoRead output
NoRead output = '?'
NoRead output OFF
47