Table of Contents
Advertisement
Configuration using configuration codes
7.5.2
Codabar code selection
By reading in one of the following configuration codes, reading of the Codabar code type
is activated or deactivated. In addition, it is possible to configure the number of digits that
are to be read (value range for number of digits: 2 ... 60, factory setting: 4 ... 60).
Codabar - standard settings
Codabar - minimum number of digits
Figure 7.23: Configuration codes for activating/deactivating the Codabar code type
Notice!
To set the minimum or maximum number of digits, please first read in the above configura-
tion code and then the digits for the desired number of digits (see "Programming codes for
the configuration" on page 92). Conclude parameter entry by reading in the Save program-
ming code.
For further code settings for the Codabar code type, please contact Leuze electronic.
50
Read code type Codabar ON
Technical description LSIS 22x
Read code type Codabar OFF
Codabar - maximum number of digits
Leuze electronic
Advertisement
Table of Contents
