Table of Contents
Advertisement
Configuration using configuration codes
7.5
Configuring decoding (code selection)
The LSIS 22x supports nearly all common code types.
For each of the code types listed in the following, you can use configuration codes to indi-
vidually set whether or not a given code type is to be decoded and output.
In addition, for some codes you can define that only codes with a configured number of
digits are output and whether check characters are to be output.
• All code types
• Codabar
• Code 39
• Code 32 pharmaceutical (PARAF)
• Interleaved 2/5
• Code 93
• Code 128
• GS-1-128
• UPC-A
• UPC-E
• UPC-E1
• EAN/JAN-13
• EAN/JAN-8
• GS1 DataBar Omnidirectional
• GS1 DataBar Limited
• GS1 DataBar Expanded
• PDF417
• MicroPDF417
• GS1 Composite
• QR Code
• Data Matrix
• MaxiCode
• Aztec Code
Notice!
In addition to the common code types listed here, other code types can also be read. For
further information, please contact Leuze electronic.
48
Technical description LSIS 22x
chapter 7.5.1
chapter 7.5.2
chapter 7.5.3
chapter 7.5.4
chapter 7.5.5
chapter 7.5.6
chapter 7.5.7
chapter 7.5.8
chapter 7.5.9
chapter 7.5.10
chapter 7.5.11
chapter 7.5.12
chapter 7.5.13
chapter 7.5.14
chapter 7.5.15
chapter 7.5.16
chapter 7.5.17
chapter 7.5.18
chapter 7.5.19
chapter 7.5.20
chapter 7.5.21
chapter 7.5.22
chapter 7.5.23
Leuze electronic
on page 49
on page 50
on page 51
onpage 53
on page 54
on page 56
on page 57
on page 58
on page 59
on page 60
on page 60
on page 61
on page 62
on page 63
on page 63
on page 64
on page 65
on page 66
on page 67
on page 68
on page 69
on page 70
on page 71
Advertisement
Table of Contents
