Code 93 Code Selection; Figure 7.29: Configuration Codes For Activating/Deactivating The Code 93 Code Type - Leuze electronic LSIS 222 Technical Description

Configuration using configuration codes
7.5.6

Code 93 code selection

By reading in one of the following configuration codes, reading of the Code 93 code type
is activated or deactivated. In addition, it is possible to configure the number of digits that
are to be read (value range for number of digits: 0 ... 80, factory setting: 0 ... 80).
Code 93 - standard settings
Code 93 - minimum number of digits

Figure 7.29: Configuration codes for activating/deactivating the Code 93 code type

Notice!
To set the minimum or maximum number of digits, please first read in the above configura-
tion code and then the digits for the desired number of digits (see "Programming codes for
the configuration" on page 92). Conclude parameter entry by reading in the Save program-
ming code.
Notice!
For other code settings for the Code 93 code type, please contact Leuze electronic.
56
Read code type Code 93 ON
Technical description LSIS 22x
Read code type Code 93 OFF
Code 93 - maximum number of digits
Leuze electronic