Lsis 223 M5M-R1 - Usb Interface; Figure 5.6: Usb Pin Assignment - Leuze electronic LSIS 222 Technical Description

Electrical connection
5.2.2

LSIS 223 M5M-R1 - USB interface

The USB interface is used primarily for outputting the read and decoded code contents of
the activated code types.
Notice!
Preferably, use the ready-made connection cables from Leuze electronic (see chapter 10.3
on page 78).
Attention!
Observe the maximum cable length of 3m!
If using self-made cables, observe the following notice:
Notice for connecting the USB interface!
Ensure adequate shielding. The entire connection cable must be shielded and earthed. Use
only full-/high-speed data lines acc. to USB 2.0 specifications.
USB cable assignments
Host
Figure 5.6:
26
SH
GND
D+
D-
VB
USB pin assignment
Technical description LSIS 22x
shield
sw/BK
4
gn/GN
3
ws/WH
2
rt/RD
1
up to 3m!
SWI
FE GND
VB SWO
7
n. c.
D- Data
D+ Data
Leuze electronic