Stand-Alone Connection; Figure 3.6: Stand-Alone Connection - Leuze electronic LSIS 222 Technical Description

3.4

Stand-alone connection

The code readers of the LSIS 22x series can be operated as individual "stand alone"
devices. The LSIS 22x features an 8-pin M12 connector for the electrical connection of the
supply voltage, the interface and the switching input and output. The connector can be
turned 90°, thereby allowing cables to be laid optimally even in constrained spaces.
Host interface (RS 232 or USB),
supply voltage + 2 I/O
Turning connector, turnable by 90°
Figure 3.6:
Typically, the configuration codes are used to configure the LSIS 22x. Configuration via
online commands is also possible.
The switching input and output are used for reading-gate control and for signaling
successful reading.
The LSIS 22x can exchange data with the host computer via the RS 232 or USB interface.
The framing protocol used for this purpose can be adapted to the specific application. With
the USB interface, keyboard emulation is also possible.
Leuze electronic
Stand-alone connection
Technical description LSIS 22x
Device description
15