7.5.23 Aztec Code Code Selection; Figure 7.46: Configuration Codes For Activating/Deactivating The Aztec Code Code Type - Leuze electronic LSIS 222 Technical Description

7.5.23 Aztec Code code selection

By reading in one of the following configuration codes, reading of the Aztec Code code
type is activated or deactivated. In addition, it is possible to configure the number of digits
that are to be read (value range for number of digits: 1 ... 3832, factory setting: 1 ... 3832).
Read code type Aztec Code ON
Aztec Code - standard settings
Aztec Code - minimum number of digits

Figure 7.46: Configuration codes for activating/deactivating the Aztec Code code type

Notice!
To set the minimum or maximum number of digits, please first read in the above configura-
tion code and then the digits for the desired number of digits (see "Programming codes for
the configuration" on page 92). Conclude parameter entry by reading in the Save program-
ming code.
Notice!
For other code settings for the Aztec Code code type, please contact Leuze electronic.
Leuze electronic
Configuration using configuration codes
Technical description LSIS 22x
Read code type Aztec Code OFF
Aztec Code - maximum number of digits
71