Table of Contents
Advertisement
Configuration using configuration codes
7.3.5
Reading codes on LED displays (mobile phone read mode)
The decoder of theLSIS 22x can be optimized to read codes on the display of mobile
devices such as smartphones or on other LED displays with reflective surfaces. If this
option is selected, printed codes may be decoded at a slightly reduced reading speed.
By reading in one of the following configuration codes, the mobile phone read mode
option in the manual trigger mode or streaming presentation mode trigger mode is
switched on.
To switch off this option, please read in the configuration code for the manual/serial
trigger mode in the normal or enhanced variant (see figure 7.6)
Mobile phone read - manual trigger mode
Figure 7.18: Configuration codes for switching-on the mobile phone read mode option
44
Technical description LSIS 22x
Mobile phone read - streaming presentation mode
Leuze electronic
Advertisement
Table of Contents
