Figure 7.28: Configuration Codes For Handling The Check Character With Code Interleaved 2/5 - Leuze electronic LSIS 222 Technical Description

Handling of the Interleaved 2/5 check character
For the handling of the optional check character present with Code Interleaved 2/5, you can
make the following settings by reading in one of the following configuration codes:
• Ignore check character
Codes with and without check character are read (factory setting).
• Evaluate check character but do not transmit
Only codes with check character are read. The check character is validated.
• Evaluate and transmit check character
Only codes with check character are read. The check character is validated and out-
put in the message string following the code content.
Evaluate and transmit check character

Figure 7.28: Configuration codes for handling the check character with Code Interleaved 2/5

Leuze electronic
Ignore check character
Technical description LSIS 22x
Configuration using configuration codes
Evaluate check character but do not transmit
55