7.5.16 Gs1 Databar Expanded Code Selection; Figure 7.39: Configuration Codes For Activating/Deactivating The Gs1 Databar Expanded Code Type - Leuze electronic LSIS 222 Technical Description

Configuration using configuration codes

7.5.16 GS1 DataBar Expanded code selection

By reading in one of the following configuration codes, reading of the GS1 DataBar
Expanded code type is activated or deactivated. In addition, it is possible to configure the
number of digits that are to be read (value range for number of digits: 4 ... 74, factory
setting: 4 ... 74).
Read code type GS1 DataBar Expanded ON

Figure 7.39: Configuration codes for activating/deactivating the GS1 DataBar Expanded code type

Notice!
To set the minimum or maximum number of digits, please first read in the above configura-
tion code and then the digits for the desired number of digits (see "Programming codes for
the configuration" on page 92). Conclude parameter entry by reading in the Save program-
ming code.
64
GS1 DataBar Expanded -
standard settings
GS1 DataBar Expanded -
minimum number of digits
Technical description LSIS 22x
Read code type GS1 DataBar Expanded OFF
GS1 DataBar Expanded -
maximum number of digits
Leuze electronic