Code 39 Code Selection; Figure 7.24: Configuration Codes For Activating/Deactivating The Code 39 Code Type - Leuze electronic LSIS 222 Technical Description

7.5.3

Code 39 code selection

By reading in one of the following configuration codes, reading of the Code 39 code type
is activated or deactivated. In addition, it is possible to configure the number of digits that
are to be read (value range for number of digits: 0 ... 48, factory setting: 0 ... 48).
Also optionally configurable is the check-character evaluation and output.
Code 39 - standard settings
Code 39 - minimum number of digits

Figure 7.24: Configuration codes for activating/deactivating the Code 39 code type

Notice!
To set the minimum or maximum number of digits, please first read in the above configura-
tion code and then the digits for the desired number of digits (see "Programming codes for
the configuration" on page 92). Conclude parameter entry by reading in the Save program-
ming code.
Leuze electronic
Read code type Code 39 ON
Technical description LSIS 22x
Configuration using configuration codes
Code 39 - maximum number of digits
Read code type Code 39 OFF
51