7.5.21 Data Matrix Code Selection; Figure 7.44: Configuration Codes For Activating/Deactivating The Data Matrix Code Type - Leuze electronic LSIS 222 Technical Description

7.5.21 Data Matrix code selection

By reading in one of the following configuration codes, reading of the Data Matrix code
type is activated or deactivated. In addition, it is possible to configure the number of digits
that are to be read (value range for number of digits: 1 ... 3116, factory setting: 1 ... 3116).
Read code type Data Matrix ON
Data Matrix - standard settings
Data Matrix - minimum number of digits

Figure 7.44: Configuration codes for activating/deactivating the Data Matrix code type

Notice!
To set the minimum or maximum number of digits, please first read in the above configura-
tion code and then the digits for the desired number of digits (see "Programming codes for
the configuration" on page 92). Conclude parameter entry by reading in the Save program-
ming code.
Notice!
For further code settings for the Data Matrix code type, please contact Leuze electronic.
Leuze electronic
Configuration using configuration codes
Technical description LSIS 22x
Read code type Data Matrix OFF
Data Matrix - maximum number of digits
69